Invexa 50 SC Termiticide | Fipronil 50 g/L - Best Anti Termite Spray Product In Pakistan
Protect your property with Invexa 50 SC, a premium non-repellent fipronil termiticide. Get complete termite colony elimination through the Domino Effect. Fipronil is the best anti termite spray product in Pakistan.
Invexa 50 SC: Premium Termite Colony Elimination Technology
Invexa 50 SC is an advanced, professional-grade non-repellent termiticide engineered to protect your most valuable structures. Utilizing powerful Fipronil 50 g/L technology, Invexa doesn’t just repel termites it invades the colony silently, eliminates the entire population at its source, and provides long-lasting residual protection. Whether you are performing Pre-Construction soil treatment in Lahore, Post-Construction drill-and-inject defense in Karachi, or preventive spray treatment on wooden furniture in Islamabad, Invexa 50 SC offers the residual strength needed to withstand Pakistani environmental conditions, preserving your future by protecting your structure today. Invexa 50 SC is an advanced, professional-grade non-repellent termiticide engineered to protect your most valuable structures . Utilizing powerful Fipronil 50 g/L technology, Invexa doesn’t just repel termites it invades the colony silently, eliminates the entire population at its source, and provides long-lasting residual protection.
SAFETY & STORAGE
- Keep out of reach of children.
- Do not breathe spray or mist. Use only in well-ventilated areas
- Do not eat, drink, or smoke while using this product
- Harmful if swallowed. Avoid contact with skin, eyes, and clothing
Storage & Disposal
- Store in original container, tightly closed, in a cool, dry, well-ventilated place
- Keep away from food, feed, and drinking water
- Protect from direct sunlight and heat
- Do not reuse empty container
Why Invexa 50 SC is the Professional Choice
🏠 Complete Colony Elimination
Targets the source, killing the termites you don't see
🛡️ Long-Lasting Protection
Creates a strong, invisible protective barrier in the soil
🧪 Non-Repellent Technology
Termites cannot detect the treatment, ensuring maximum lethal transfer
💼 Professional Performance
Trusted by Pest Management Professionals for high-stakes defense
APPLICATION & TECHNICAL GUIDE
Target Pests: All castes of Subterranean Termites (Soil-borne), including workers, soldiers, and reproductives
📊 Standard Mixing Ratio & Coverage Reference Matrix
| Application Type | Mixing Ratio (Invexa 50 SC : Water) | Recommended Preparation | Target Coverage Area |
| General Soil Treatment | 1:25 (100 ml per 2.5 Liters of water) | Mix the required product volume into 250 Liters of clean water. | Up to 1,080 Sq. Ft. ($100 \text{ m}^2$) |
| High Termite Pressure | 1:20 (125 ml per 2.5 Liters of water) | Mix the required product volume into 250 Liters of clean water. | Up to 1,080 Sq. Ft. ($100 \text{ m}^2$) |
Post-Construction (Drill & Inject) | 1:25 (100 ml per 2.5 Liters of water) | Mix the required product volume into 200 Liters of clean water. | Up to 1,080 Sq. Ft. ($100 \text{ m}^2$) |
Wood Treatment (Preventive) | 1:100 (100 ml per 10 Liters of water) | Mix thoroughly based on equipment capacity. | Continuous, uniform surface saturation. |
🏗️ 1. Pre-Construction Soil Treatment (Soil Barrier Technology)
An unbroken chemical barrier beneath and around a new structure is your primary line of defense against soil-borne subterranean termites.
Application Method: Apply the prepared solution directly to the soil profiles beneath foundations, plinths, and around the perimeter of the structure before floor slabs are poured.
Uniform Coverage: Ensure thorough, continuous coverage of the treated soil layers to prevent leaving untreated gaps that termites could exploit.
Water Quality: Always use clean water for the initial mix.
Solution Management: Maintain constant agitation inside your spray tank during both the mixing phase and the application process to keep the formulation fully suspended.
💉 2. Post-Construction Treatment (Drill & Inject Method)
For existing buildings experiencing active termite infestations or requiring a long-term preventative upgrade.
Drill Hole Spacing: Professionally drill precision injection holes spaced exactly 3 feet apart along the interior or exterior foundation walls.
Drill Angle & Depth: Position your drill at an angle of 45° pointing directly toward the foundation. Drill down to a depth of 6 to 9 inches.
Injection Volume: Inject approximately 3 to 5 Liters of the prepared Invexa 50 SC solution into each individual hole.
Sealing: Securely cap and seal all drilled holes with cement or durable plugs immediately following chemical injection to lock in the treatment.
🪵 3. Preventative Usage on Wood Structures
Designed to shield structural timber, wooden frameworks, doors, and high-value furniture assets from devastating wood-boring termite damage.
Mixing Instructions: Carefully mix 100 ml of Invexa 50 SC into 10 Liters of clean water.
Application Techniques: Apply the solution directly to raw, unpainted, or unvarnished wood using a brush, industrial surface sprayer, or deep-soaking methods.
Complete Penetration: Ensure the application is completely thorough and uniform across all exposed wood grain faces for maximum chemical absorption.
Is Invexa the Best Anti Termite Spray Product In Pakistan?
When safeguarding your home or investment in Pakistan, repelling termites is not enough you must eliminate them. Subterranean termites in Pakistan are relentless, often causing catastrophic, hidden damage to foundations, wooden fixtures, and valuable furniture before they are even detected.
Invexa 50 SC stands out as a leading contender for the title of the best anti termite spray product in Pakistan because it utilizes a “Transfer Effect”. While traditional, cheaper repellents create a simple barrier that termites eventually find a way around, Invexa’s non-repellent Fipronil formula ensures that termites unknowingly carry the lethal active ingredient back to the heart of the nest, resulting in Complete Colony Elimination through “The Domino Effect
Important Application Tips:
Use clean water for mixing.
Maintain constant agitation while mixing and applying.
Seal all holes tightly after post-construction injection treatment
Experience the Apex Core Difference Today!
Why suffer another day? Our guaranteed pest solutions come with a smile promise – 100% effective or your money back!
Frequently Asked Questions
Q1: Can I use Invexa 50 SC on my wooden furniture, and how should it be applied?
A: Yes, Invexa 50 SC is highly effective as a preventive treatment for wood structures and valuable furniture assets. To apply, mix 100 ml of Invexa 50 SC in 10 Liters of clean water. You can apply this mixture directly to bare, unpainted wood using a brush, surface spray, or deep-soak method. Always ensure complete and uniform coverage to protect the wood grain from future termite attacks.
Q2: What makes a non-repellent termiticide like Invexa 50 SC better than traditional sprays?
A: Traditional anti-termite sprays act as repellents, which termites can detect and simply avoid, eventually finding a gap in the barrier to enter your property. Invexa 50 SC uses advanced non-repellent technology, meaning termites cannot detect the chemical in the soil or wood. They crawl freely through the treated zone, unknowingly picking up the Fipronil active ingredient and transferring it to the rest of the nest, eliminating the entire colony at its source.
Q3: How far apart should the holes be drilled for a post-construction termite treatment?
A: For an effective Post-Construction (Drill & Inject) treatment, you should drill injection holes spaced exactly 3 feet apart along the foundation. Drill down at a 45° angle toward the foundation to a depth of 6 to 9 inches. Inject approximately 3 to 5 Liters of the prepared solution into each hole, and ensure you tightly seal the holes immediately after treatment.
Q4: What is the correct mixing ratio for handling a severe termite infestation?
A: If you are dealing with High Termite Pressure or a severe subterranean infestation, the recommended mixing ratio is 1:20 (which is 125 ml of Invexa 50 SC per 2.5 Liters of water). For a standard full-tank professional application, you will mix the required quantity of Invexa 50 SC into 250 Liters of water, which provides coverage for up to 1,080 Sq. Ft. ($100 \text{ m}^2$) of soil.
Q5: Is constant agitation really necessary while mixing and applying the solution?
A: Yes, maintaining constant agitation while mixing and applying is critical for both pre-construction and post-construction treatments. Agitation ensures that the Fipronil 50 g/L SC formulation remains perfectly suspended and evenly distributed throughout the water. This guarantees that every liter of spray delivered to the soil or foundation carries the exact required dosage for complete colony elimination.
